Children present - please drive slowly.
Machine rollover due to uneven/sloped or wet terrain.
Sprayer instability from improperly filled or unbalanced tanks.
Chemical exposure during mixing, spraying, or maintenance.
Entanglement or crushing from moving parts or PTO (Power Take-Off) shaft.
Spray drift affecting people, animals, waterways, or crops.
Visibility limitations in tight or undulating paddocks with wide spray boom.
Slipping or falling while mounting/dismounting the tractor or sprayer.
Known Incidents
Tractor rollovers while spraying on hillsides or wet paddocks.
Chemical burns and inhalation injuries from incorrect PPE use.
Injuries from PTO shaft entanglement or maintenance without isolation.
Sprayer tank leaks causing environmental or health harm.
Terrain and Rollover Risk
Use Rollover Protective Structure (ROPS) and seatbelts.
Avoid steep slopes or plan spray routes to approach slopes vertically taking liquid movement into account.
Operate at low speed and avoid sharp turns on slopes.
Never spray on paddocks that are excessively wet or boggy.
Fit wide or dual wheels to increase tractor stability if appropriate.
Ensure sprayer is properly ballasted and mounted.
Sprayer Setup and Maintenance
Conduct a pre-use check on all sprayer parts, including hoses and tank integrity.
Ensure sprayer is correctly calibrated and securely fastened.
PTO and Mechanical Safety
Fit PTO shaft guards and check they are in place before operation.
Turn the tractor off before performing maintenance or unclogging.
Chemical Safety
Always wear appropriate PPE (gloves, goggles, respirator, overalls as directed by the Safety Data Sheet).
Follow label instructions and SDS for all chemicals used.
Mix and load chemicals in a well-ventilated area, preferably on a bunded pad.
Training and Supervision
Operators must be trained and competent in sprayer use and chemical handling.
Supervise new staff until confident in their safe use of the equipment